miller logo
main menu
menu bar

Benefits of a "Miller Cabinetry" Cabinet

  •  Cabinets are constructed with dowels and concealed hardened screws.

  •  Cabinet interior sides, tops, bottoms, and shelves are 3/4" thick birch veneer hardwood plywood which has a UV cured finish.

  •  There is NO PARTICLE BOARD in any part of our cabinet.

  •  Cabinet exterior sides, doors, and drawer fronts are solid wood and/or wood veneer.

  •  Shelves are 3/4" thick, full depth, and adjustable.

  •  Drawers are dovetailed construction. Sides are 5/8" thick solid aspen and bottoms are 1/4" thick birch hardwood plywood with a UV cured finish. Drawer slide hardware is full extension, undermounted, with a soft close action.

  •  120 degree hinges are fully concealed, quick release, 3-way adjustable, and soft close.

  •  Wall cabinets are mounted to the wall with a steel suspension system.

  •  Base cabinets use adjustable levelers. There are no shims involved in the base cabinet installation.

  •  Removable wood toe board is standard. This gives full access under the base cabinets.

  •  Cabinet exteriors receive a catalyzed lacquer finish which is resistant to water and most household chemicals.

  •  Crown moulding and light trim are standard on all wall cabinets.



miller logo bottom

28308 Point Lookout Road            Leonardtown, MD 20650

(301) 475-5041



Copyright 2017, Miller Industries, Inc., All Rights Reserved